Understanding the PN rating in a valve is essential if you work across European and American standards.
Here’s a clean and clear guide that walks you through what PN means, how it compares to ANSI class, why a direct swap isn’t always accurate, and how to ensure you’re using the right valve for the job.
What Does Pressure Nominale (PN) Mean?
PN (nominal pressure) is a designation used in many EN and ISO component standards; it is not a universal operating-pressure rating.
For example, PN 16 identifies a nominal rating series; it does not guarantee that every PN 16 valve can operate at 16 bar at every temperature. Check the applicable valve or flange standard, material and design temperature against its pressure–temperature rating table.
Understanding the ANSI/ASME Class Rating System
The ANSI/ASME Class system, used mainly in North America, assigns pressure ratings like Class 150, 300, or 600.
A Class number is a rating designation, not a pressure value. Allowable pressure depends on material and temperature under the applicable standard, such as ASME B16.34 for valves or ASME B16.5 for flanges. The approximate figures below are illustrative only, not universal design limits.
| ANSI Class | Approx. Pressure at Room Temp |
| Class 150 | ~19 bar / 285 psi |
| Class 300 | ~51 bar / 740 psi |
| Class 600 | ~102 bar / 1480 psi |
Why Direct Conversion Isn’t Always Possible (Temperature & Material Factors)
Direct conversion between PN and Class is an approximation at best. This is because:
- No single temperature baseline applies: Neither PN nor ASME Class can be converted using one fixed temperature. The allowable pressure depends on the applicable standard, material group and design temperature.
- Material & flange design influence performance: Actual pressure capacity changes with construction material (carbon steel vs. stainless) and flange or valve body design per ASME pressure-temperature charts.
A Practical Conversion Chart (PN to Class)
This table is an illustrative label cross-reference, not a pressure–temperature equivalence or a design rule. Verify the applicable standard, component type, material group and design temperature against the relevant rating table before selecting a valve.
| Approx. PN (bar) | Approx. ANSI Class |
| PN 20 | Class 150 |
| PN 50 | Class 300 |
| PN 100 | Class 600 |
| PN 160 | Class 900 |
| PN 250 | Class 1500 |
| PN 420 | Class 2500 |
How CLDG Ensures the Correct Rating for Your Application
At CLDG, we understand how critical matching pressure rating to application is. That’s why:
- Each valve is clearly marked with its PN and/or Class rating.
- We support both DIN/ISO (PN) and ASME (Class) systems and help you select the right pressure-temperature spec.
- Every forged valve undergoes material certification, and pressure testing aligned to industry standards.
When in doubt, our team can guide you toward the correct flange rating and material combo to ensure safe, compliant operation.
Need to convert a PN rating to an ANSI class—or the other way around? Get in touch, and we’ll guide you through the process.For CLDG’s full line of tested, certified valves built to both PN and Class standards, explore our catalog: CLDG Valve Products.





